The Easiest Wire Routing Solution.
Makes your Amplifier Install look Clean and Professional.
Safely holds your wiring in place, protects your wiring from chafing Metal Surfaces at the same time as on the same time sealing out moisture, and preventing annoying air leaks that you’ll be able to every now and then encounter with usual Firewall Grommets.
Nickel Plated Brass Body: Is not going to Rust/Oxidize, Melt, or break down through the years.
Polyamide (PA) Compression Bushings: Offers a durable top quality plastic ideal for a long run hold, even in high warmth applications.
Nitrile Rubber Wire Seal & Firewall Seal: Offering a long-lasting tight seal from air leaks and moisture from pressure washing.
Wire Size Range: 8 Gauge (8 AWG)
Fits Wires with Out of doors Diameter Range: 7/32″ – 3/8″ (5-10mm)
Thread Depth/Length: 1/2″ (12.70mm)
Hole Size/Hole Saw/Drill Required: 3/4″ (20mm)
Also Fits: Wire Loom Sizes: 1/4″
Long Term Operating Temperature: -40*F to 220*F (40*C to one hundred*C)
Maximum Short Term Operating Temperature: 250*F (120*C)
Will also be mounted to Metal, Fiberglass, Plastic, Picket, anything else you’ll be able to drill a hole in!
Will also be installed in Firewalls, through Floor Pans, even in Speaker Boxes for a clean look.
8 AWG Bushings have extra long 1/2″ Mounting Thread Length
Can easily be installed/Mounted to Materials as much as 1/2″ thick. (12.70mm)
Installation is straightforward:
Just drill the right kind size hole: (Required hole Size for 0 Gauge Bushing: 3/4″ – 20mm)
Install the Firewall grommet during the hole, install and tighten the firewall nut.
Slide the wire through to the required length and tighten the compression nut.
And you have a really perfect seal, and your cable is not going anyplace!
High Quality Nickel Plated Brass, Adds a Durable and Clean touch for your install.
Compresses around your 8 Gauge Cable to fasten it in place, and seal out Moisture and Air Leaks.
Will also be mounted to Metal, Picket, Fiberglass, and even Plastic. (Such as Firewalls, Floor Pans, and even Speaker Enclosures.)
Extra Long Mounting Threads in comparison to Competitors. (Will also be Mounted to surfaces as much as 1/2″ – 12.70mm thick)
Required Hole Size: 3/4″ (20mm) (Use a Hole Saw, Step Drill, or Knockout Punch)