Our material is produced by the largest European manufacturer of automotive components. This facilitates us to offer great quality at The most productive price. Noico 50 mil is just $1.48 per 1 sqft! You don’t seem to be just buying a very good quality product but also saving more than 20% comparing to Gtmat, Boom mat and Extreme! It is more cost-effective solution than brands like Dynamat Xtreme, Hushmat and Stinger RoadKill!
Noico 50 mil is full weighted sound deadening material! Vibro-dampening layer is a composition of butyl and different improvers. These items will have to be used in the right kind proportions so the maximum efficiency may well be achieved. The optimal weight of 50 mil material is minimum of 0.47 lbs/1 sqft. Different weight of the material may have an effect on the physical properties thus decreasing the performance. Noico 50 mil has an optimum level of adhesion! Noico installs and cuts easily and overall is a user-friendly soundproofing material.
Noico In reality works! Material removes vibrations and reduces the overall noise level and rattle at the same time as in vehicle taking into account higher comfort. Noico 50 mil also improves a quality of your sound system. It acts as insulation. Then again, the usage of Noico 50 mil by myself may not be 100% solution for your vehicle at the same time as still making a large difference. We recommend the usage of Noico 50 mil in combination with a layer of closed cell foam which is a special heat and noise blocking material.
PAY ATTENTION! Correct installation of material is 50 % of success in the process of soundproofing car. Carefully pre-roll material to the degreased surface. Special embossing on the foil is made for convenience of installation so you’ll be able to see the areas that are rolled properly and those one needing improvement.
Noico 50 mil is all in all prime quality sound deadening insulation.
The most productive price for 50 mil automotive butyl and foil sound deadening on Amazon! Noico 50 mil is just $ 1.48 per 1 sqft! You don’t seem to be just buying a very good quality product but also saving more than 20 % comparing to Gtmat, Boom Mat and Extreme! And naturally. It turns out to be more cost-effective solution than such brands as: Dynamat Xtreme, Hushmat and Stinger RoadKill!
Automotive self-adhesive insulation basically consists of butyl. Noico sound deadening has a total weight of 0.47 lbs/1sq ft. This weight ensures maximum efficiency and sound insulation that may be most likely gained from 50 mil thickness material. In reality easy to use!
Vibro dampener & Sound deadener material Noico 50 mil is designed to meet the challenges of an overall reduction of rattle and noise in the car. Vibro dampening material will strengthen your standard audio system (feel the difference of sound speakers and a subwoofer). Noico to some degree is a thermal insulator and can give a contribution to more comfortable pastime in the car – both in heat and cold.
Audio insulation Noico has a special indicator as to whether it is installed as it should be. The special embossing on the foil should be rolled out with a roller till it is plain smooth, then you can be 100% sure that the insulation is set as it should be and professionally! The sound dampening material is useful size sheets which make it easier with regards to cutting and installation process!
Sound deadening material specifications: Nominal thickness 50 mil; Total coverage area of 25 sq.feet; Number of sheets in the stack 12; Nominal sheet size 20,5×14,5 inch. Roller isn’t included.